null

ThermoFlex Plus 30"

Login for pricing

dropship_colors:
all
Type:
Standard
Finish:
Matte
Clothing:
Cotton
Clothing:
Linen
Clothing:
Wool
Clothing:
Lycra
Clothing:
Spandex
Clothing:
Poly Blends
Clothing:
Cotton/Poly Blends
blog:
69

Description

ThermoFlex Plus 30 inch has got you covered for your larger projects and/or for covering a large surface!

  • This item Is a Drop Ship Item.
  • This material will ship separately from your order.
  • Material ships ground from PoliTape- Orange Park Florida. These rolls take up to 5 days to process before shipping ground.
  • Quality, brand name heat transfer vinyl
  • Soft hand, very flexible, & moves with the garment
  • Polyurethane composition
  • Durable and will outlast the life of the garment when applied properly
  • 100 microns thick
  • Matte finish
  • Can be layered*
  • Adheres to Cotton, Uncoated Polyester, Cotton/Polyester, Polyester/Acrylic
  • Dropship from Manufacturer takes 2-5 business days to ship
  • Due to the manufacturing process, material may vary in width by 1/8-1/2"
  • ThermoFlex Pantone Swatches

**ThermoFlex® PLUS will NOT adhere to nylon or polyester mesh. Be advised that dye migration has occurred with low energy dyes in polyester and poly-blend fabrics.

For your garment needs, we recommend Heat Transfer Clothing

30" Pricing:   
30 yd roll = $360.00

  • DROP SHIP product; this material will be sent via ground shipping from Politape and will ship separately from your order.
  • 330° F
  • 15 seconds
  • Medium even pressure
  • Cut in reverse
  • Cotton, linen, wool, lycra, polyester blends. No nylon or mesh.
  • Wash warm, tumble dry on normal setting.

Additional Instructions

Application instructions for dazzle cloth, shiny polyester materials, and coated polyester materials:

Damp a cloth with rubbing alcohol (isopropyl alcohol), then gently apply it to the area on the garment you want to apply your design. Allow it to dry and apply your material. This will allow the adhesive to better penetrate the garment.

We highly recommend that you wash and dry your garments prior to pressing your design. This will also allow the adhesive to better penetrate the garment.

Cut Settings for Graphtec CE6000:

 Settings can alter for each cutter and how dull or sharp the blade is. Test Cutting is Recommended.

1. Offset: 0

2. Speed: 25 cm/s

3. Acceleration: 4

4. Cut Force: 16

*HTW uses a 45 Degree Blade

Cut Settings for Silhouette Cameo:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Material: Heat Transfer, Smooth

Blade: 3

Speed: 8

Force: 6

Cut Settings for Cricut®:

Settings can alter on how dull or sharp the blade is. Test Cutting is Recommended.

Set Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade (Standard)